| | |
 | 500ft RG58A/U THINNET COAX PVC CABLE SPOOL(Reference #166032265)
RG58 Thinnet cable from CableWarehouse.Biz is the ideal solution for supporting your legacy 10Base2 network. Made from 20 AWG stranded (19x32).037in tinned copper conductors, foam high density polyethylene insulation, Duobond(R)II and a 93% tinned copper braid shield, and a PVC jacket, it provides consistent performance throughout your network. This 50Ohm wire features dual shielding to eliminate susceptibility to external EFI/RMI. Sold in 500 foot spools. Custom lengths and Thinnet patch cords are also available. Contact us for a quote today!
Price: $189.14 |
|
|
25ft TAPERWIRE(TM) 75Ohm FLAT CABLE(Reference #166143030)
Taperwire(TM) is an ultra flat 75Ohm Cable with a self adhesive backing that allows you to easily hide the wire in plain sight. Many houses are not conducive to running wire after the walls are up. Stucco, plaster and masonry walls can pose challenges for even the most skilled installer. Fire blocking within the wall cavities and foam insulation can be impossible obstacles to overcome. Taperwire is less than 1/32in thick. Simply stick it to the wall and cover it with paint, wall paper or joint compound to make it disappear. Use the Impact Acoustics gold-plated F connectors (#29788) for a complete installation (sold separately). Features: Ultra flat wire, less than 1/32in thick. Hide the wire in plain sight. Self-adhesive backing holds wire in place. 75Ohm cable.
Price: $43.03 |  |
|
|
 | 250ft RG59/U IN WALL COAXIAL CABLE - COPPER CENTER 95% BRAID(Reference #166243054)
Achieving the best picture possible for your composite video installations requires the correct cable. Copper clad steel conductors are ideal for RF applications like antennas, cable television and satellite installations but result in poor quality composite video signals. Impact Acoustics offers an RG-59/U coax cable designed specifically for installations where you intend to run composite video, RGBHV video, component video and even surveillance systems. This cable has 20AWG bare copper center conductor surrounded by a foam polyethylene dielectric, 95% copper braid and PVC jacket. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. Swept tested to 3GHz to ensure performance at applicable frequencies. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. Features: 20AWG solid bare copper center conductor. 95% bare copper shield. Foam polyethylene dielectric. CM/CL2 rated PVC jacket. Swept tested to 3GHz. Sequential foot marking. UL listed. Ideal for composite video, RGBHV video, component video and even surveillance systems.
Price: $34.09 |
|
|
500ft RG59/U IN WALL COAXIAL CABLE - COPPER CENTER 95% BRAID(Reference #166343055)
Achieving the best picture possible for your composite video installations requires the correct cable. Copper clad steel conductors are ideal for RF applications like antennas, cable television and satellite installations but result in poor quality composite video signals. Impact Acoustics offers an RG-59/U coax cable designed specifically for installations where you intend to run composite video, RGBHV video, component video and even surveillance systems. This cable has 20AWG bare copper center conductor surrounded by a foam polyethylene dielectric, 95% copper braid and PVC jacket. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. Swept tested to 3GHz to ensure performance at applicable frequencies. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. Features: 20AWG solid bare copper center conductor. 95% bare copper shield. Foam polyethylene dielectric. CM/CL2 rated PVC jacket. Swept tested to 3GHz. Sequential foot marking. UL listed. Ideal for composite video, RGBHV video, component video and even surveillance systems.
Price: $66.33 | |
|
|
| | 1000ft RG59/U IN WALL COAXIAL CABLE - COPPER CENTER 95% BRAID(Reference #166443056)
Achieving the best picture possible for your composite video installations requires the correct cable. Copper clad steel conductors are ideal for RF applications like antennas, cable television and satellite installations but result in poor quality composite video signals. Impact Acoustics offers an RG59/U coax cable designed specifically for installations where you intend to run composite video, RGBHV video, component video and even surveillance systems. This cable has 20AWG bare copper center conductor surrounded by a foam polyethylene dielectric, 95% copper braid and PVC jacket. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. Swept tested to 3GHz to ensure performance at applicable frequencies. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. Features: 20AWG solid bare copper center conductor. 95% bare copper shield. Foam polyethylene dielectric. CM/CL2 rated PVC jacket. Swept tested to 3GHz. Sequential foot marking. UL listed. Ideal for composite video, RGBHV video, component video and even surveillance systems.
Price: $121.22 |
|
|
500ft DUAL RG6/U QUAD SHIELD IN WALL COAXIAL CABLE(Reference #166543067)
Impact Acoustics Dual RG6/U Quad Shield is ideal for antenna, cable television and satellite installations. Make two cable runs at one time for dual LNB satellite or satellite and antenna installations. This cable is 18AWG copper clad steel center conductor surrounded by a foam polyethylene dielectric. A bonded aluminum foil and 60% aluminum braid over another foil and 40% aluminum braid provide 100% shield coverage. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. Swept tested to 3GHz to ensure performance at applicable frequencies. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. Features: Dual construction saves installation time. 18AWG copper clad steel center conductor. Bonded foil covered by 60% aluminum braid over foil and 40% aluminum braid provide 100% shield coverage. Foam polyethylene dielectric. CM/CL2 rated PVC jacket. Swept tested to 3GHz. Sequential foot marking. UL listed. Ideal for RF applications like outdoor TV antennas and cable television.
Price: $108.27 |  |
|
|
| | 1000ft DUAL RG6/U QUAD SHIELD IN WALL COAXIAL CABLE(Reference #166643068)
Impact Acoustics Dual RG6/U Quad Shield is ideal for antenna, cable television and satellite installations. Make two cable runs at one time for dual LNB satellite or satellite and antenna installations. This cable is 18AWG copper clad steel center conductor surrounded by a foam polyethylene dielectric. A bonded aluminum foil and 60% aluminum braid over another foil and 40% aluminum braid provide 100% shield coverage. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. Swept tested to 3GHz to ensure performance at applicable frequencies. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. Features: Dual construction saves installation time. 18AWG copper clad steel center conductor. Bonded foil covered by 60% aluminum braid over foil and 40% aluminum braid provide 100% shield coverage. Foam polyethylene dielectric. CM/CL2 rated PVC jacket. Swept tested to 3GHz. Sequential foot marking. UL listed. Ideal for RF applications like outdoor TV antennas and cable television.
Price: $217.57 |
|
|
250ft SIAMESE RG59/U COAXIAL CABLE WITH 18/2 POWER CABLE(Reference #166743113)
Make installation of surveillance systems easier by carrying video over the coax and power over the 18/2! Dual shield RG59/u coax cable features a 20AWG solid copper center conductor for a truly clean video signal. 95% solid copper braid over a foil shield protects the video signal from external EMI and RFI while providing a reliable path for PTZ signal control. UL listed cable for CL1, CL2, CM, CMX and CMG installations. Sweep-tested to 3GHz to ensure performance. The cable jacket is sequentially marked every two feet to aid in tracking the remaining cable on the spool. Features: Siamese-type construction for video and power. Dual shielded RG59/u. 95% solid copper braid suitable for PTZ control. UL Listed. Sweep-tested to 3GHz. Sequential foot marking ends at 0 feet.
Price: $73.13 |  |
|
|
| | 500ft SIAMESE RG59/U COAXIAL CABLE WITH 18/2 POWER CABLE(Reference #166843114)
Make installation of surveillance systems easier by carrying video over the coax and power over the 18/2! RG59/u coax cable features a 20AWG solid copper center conductor for a truly clean video signal. 95% solid copper braid protects the video signal from external EMI and RFI while providing a reliable path for PTZ signal control. UL listed cable for CL2, CM and CMG installations. Sweep-tested to 3GHz to ensure performance. The cable jacket is sequentially marked every two feet to aid in tracking the remaining cable on the spool.Features: Siamese-type construction for video and power. 95% solid copper braid suitable for PTZ control. UL Listed. Sweep-tested to 3GHz. Sequential foot marking ends at 0 feet
Price: $138.02 |
|
|
1000ft SIAMESE RG59/U COAXIAL CABLE WITH 18/2 POWER CABLE(Reference #166943115)
Make installation of surveillance systems easier by carrying video over the coax and power over the 18/2! RG59/u coax cable features a 20AWG solid copper center conductor for a truly clean video signal. 95% solid copper braid protects the video signal from external EMI and RFI while providing a reliable path for PTZ signal control. UL listed cable for CL2, CM and CMG installations. Sweep-tested to 3GHz to ensure performance. The cable jacket is sequentially marked every two feet to aid in tracking the remaining cable on the spool.Features: Siamese-type construction for video and power. 95% solid copper braid suitable for PTZ control. UL Listed. Sweep-tested to 3GHz. Sequential foot marking ends at 0 feet
Price: $277.02 | |
|
|
 | 100ft 3-MINIATURE COAX COMPONENT VIDEO CABLE(Reference #167043116)
Component video cable from Impact Acoustics(TM) consists of 3-mini coax for RGB applications. The cable's flexibility is increased by using a 25AWG stranded bare copper center conductor. The Mylar aluminum foil is covered by a 40% braid of tinned copper to provide 100% shield coverage. Foamed polyethylene dielectric helps the cables maintain the crucial cable geometry required to maintain a 75Ohm characteristic impedance while providing dielectric properties close to that of air. The CL2 PVC jacket is tough enough for your longest cable runs and flexible enough to go wherever you want. Features: 3-miniature 75Ohm coax cables. 25AWG stranded bare copper center conductor. 100% shield coverage. CL2-rated PVC Jacket.
Price: $53.68 |
|
|
250ft 3-MINIATURE COAX COMPONENT VIDEO CABLE(Reference #167143117)
Component video cable from Impact Acoustics(TM) consists of 3-mini coax for RGB applications. The cable's flexibility is increased by using a 25AWG stranded bare copper center conductor. The Mylar aluminum foil is covered by a 40% braid of tinned copper to provide 100% shield coverage. Foamed polyethylene dielectric helps the cables maintain the crucial cable geometry required to maintain a 75Ohm characteristic impedance while providing dielectric properties close to that of air. The CL2 PVC jacket is tough enough for your longest cable runs and flexible enough to go wherever you want. Features: 3-miniature 75Ohm coax cables. 25AWG stranded bare copper center conductor. 100% shield coverage. CL2-rated PVC Jacket.
Price: $129.47 | |
|
|
| | 500ft 3-MINIATURE COAX COMPONENT VIDEO CABLE(Reference #167243118)
Component video cable from Impact Acoustics(TM) consists of 3-mini coax for RGB applications. The cable's flexibility is increased by using a 25AWG stranded bare copper center conductor. The Mylar aluminum foil is covered by a 40% braid of tinned copper to provide 100% shield coverage. Foamed polyethylene dielectric helps the cables maintain the crucial cable geometry required to maintain a 75Ohm characteristic impedance while providing dielectric properties close to that of air. The CL2 PVC jacket is tough enough for your longest cable runs and flexible enough to go wherever you want. Features: 3-miniature 75Ohm coax cables. 25AWG stranded bare copper center conductor. 100% shield coverage. CL2-rated PVC Jacket.
Price: $251.05 |
|
|
100ft 5-MINIATURE COAX COMPONENT VIDEO CABLE(Reference #167343119)
Component video cable from Impact Acoustics(TM) consists of 5-mini coax for RGBHV applications. The cable's flexibility is increased by using a 25AWG stranded bare copper center conductor. The Mylar aluminum foil is covered by a 40% braid of tinned copper to provide 100% shield coverage. Foamed polyethylene dielectric helps the cables maintain the crucial cable geometry required to maintain a 75Ohm characteristic impedance while providing dielectric properties close to that of air. The CL2 PVC jacket is tough enough for your longest cable runs and flexible enough to go wherever you want. Features: 5-miniature 75Ohm coax cables. 25AWG stranded bare copper center conductor. 100% shield coverage. CL2-rated PVC Jacket.
Price: $78.95 |  |
|
|
| | 250ft 5-MINIATURE COAX COMPONENT VIDEO CABLE(Reference #167443120)
Component video cable from Impact Acoustics(TM) consists of 5-mini coax for RGBHV applications. The cable's flexibility is increased by using a 25AWG stranded bare copper center conductor. The Mylar aluminum foil is covered by a 40% braid of tinned copper to provide 100% shield coverage. Foamed polyethylene dielectric helps the cables maintain the crucial cable geometry required to maintain a 75Ohm characteristic impedance while providing dielectric properties close to that of air. The CL2 PVC jacket is tough enough for your longest cable runs and flexible enough to go wherever you want. Features: 5-miniature 75Ohm coax cables. 25AWG stranded bare copper center conductor. 100% shield coverage. CL2-rated PVC Jacket.
Price: $197.36 |
|
|
500ft 5-MINIATURE COAX COMPONENT VIDEO CABLE(Reference #167543121)
Component video cable from Impact Acoustics(TM) consists of 5-mini coax for RGBHV applications. The cable's flexibility is increased by using a 25AWG stranded bare copper center conductor. The Mylar aluminum foil is covered by a 40% braid of tinned copper to provide 100% shield coverage. Foamed polyethylene dielectric helps the cables maintain the crucial cable geometry required to maintain a 75Ohm characteristic impedance while providing dielectric properties close to that of air. The CL2 PVC jacket is tough enough for your longest cable runs and flexible enough to go wherever you want. Features: 5-miniature 75Ohm coax cables. 25AWG stranded bare copper center conductor. 100% shield coverage. CL2-rated PVC Jacket.
Price: $371.06 | |
|
|
| | 250ft RG6/U COAXIAL CABLE WITH COPPER CENTER AND 95% COPPER BRAID(Reference #167643125)
Achieving the best picture possible for your composite video installations requires the best cable. Copper clad steel conductors are fine for RF applications like antennas, cable television and satellite installations, but may result in poor quality composite video signals. This Impact Acoustics coax cable is designed specifically for installations where you intend to run composite video, RGBHV video, component video and even surveillance systems! This cable has 18AWG bare copper center conductor surrounded by a foam polyethylene dielectric, 95% copper braid and PVC jacket. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. Sweep-tested to 3GHz to ensure performance. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. Features: 18AWG solid bare copper center conductor. 95% bare copper shield. Foam polyethylene dielectric. CM/CL2 rated PVC jacket. Sweep tested to 3GHz. Sequential foot marking ends at 0 feet. UL listed.
Price: $50.91 |
|
|
500ft RG6/U COAXIAL CABLE WITH COPPER CENTER AND 95% COPPER BRAID(Reference #167743126)
Achieving the best picture possible for your composite video installations requires the best cable. Copper clad steel conductors are fine for RF applications like antennas, cable television and satellite installations, but may result in poor quality composite video signals. This Impact Acoustics coax cable is designed specifically for installations where you intend to run composite video, RGBHV video, component video and even surveillance systems! This cable has 18AWG bare copper center conductor surrounded by a foam polyethylene dielectric, 95% copper braid and PVC jacket. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. Sweep-tested to 3GHz to ensure performance. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. Features: 18AWG solid bare copper center conductor. 95% bare copper shield. Foam polyethylene dielectric. CM/CL2 rated PVC jacket. Sweep tested to 3GHz. Sequential foot marking ends at 0 feet. UL listed.
Price: $94.46 | |
|
|
| | 1000ft RG6/U COAXIAL CABLE WITH COPPER CENTER AND 95% COPPER BRAID(Reference #167843127)
Achieving the best picture possible for your composite video installations requires the best cable. Copper clad steel conductors are fine for RF applications like antennas, cable television and satellite installations, but may result in poor quality composite video signals. This Impact Acoustics coax cable is designed specifically for installations where you intend to run composite video, RGBHV video, component video and even surveillance systems! This cable has 18AWG bare copper center conductor surrounded by a foam polyethylene dielectric, 95% copper braid and PVC jacket. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. Sweep-tested to 3GHz to ensure performance. To help you keep track of cable used, the cable jacket is sequentially marked every two feet. Features: 18AWG solid bare copper center conductor. 95% bare copper shield. Foam polyethylene dielectric. CM/CL2 rated PVC jacket. Sweep tested to 3GHz. Sequential foot marking ends at 0 feet. UL listed.
Price: $166.09 |
|
